.webp)
5V 20A DC Switch Mode Power Supply (SMPS)
Common cabinet PSU for LED modules and controller accessories. Stable 5V output with protection features for safer operation.
Price: Tk 1,500.00 (per unit, project offer dependent)
Detailed Overview
5V 20A DC Switch Mode Power Supply (SMPS) is selected based on cabinet load, voltage stability, and power distribution method. Correct PSU sizing and wiring safety are critical for preventing flicker, overheating, and downtime.
- Stable regulated 5V DC output for LED cabinets
- Short circuit protection
- Overload protection
- Over-voltage protection
- Auto recovery after fault
- Mounting holes for fixed installation
- Aluminum body helps heat dissipation
- Low-noise / fanless design (depending on model)
Key Features
Practical features that help stable power delivery and safer cabinet operation.
- Stable regulated 5V DC output for LED cabinets
- Short circuit protection
- Overload protection
- Over-voltage protection
- Auto recovery after fault
- Mounting holes for fixed installation
- Aluminum body helps heat dissipation
- Low-noise / fanless design (depending on model)
Technical Specifications (Informational)
This section is informational only - no price and no stock. Final specs may vary by batch/model.
- Output Voltage5V DC
- Output Current0-20A
- Rated PowerUp to 100W (varies by model)
- Input Voltage100-120V / 200-240V +/-20% (auto-switch)
- Frequency50/60Hz
- CoolingNatural air cooling (fanless design)
Selection & Safety Notes
Wrong PSU selection may cause flicker, overheating, voltage drop, and long-term damage.
- Calculate PSU quantity and load based on cabinet and module count.
- Use thick DC cable and proper distribution planning to reduce voltage drop.
- For outdoor or unstable grid conditions, use surge protection and proper grounding.
- Low-quality PSU may increase ripple/noise and cause flicker or module damage.
Installation & Wiring Tips
Following safe installation practices reduces downtime and keeps cabinet wiring clean.
- Use proper fuse/MCB on the AC input side.
- Verify DC output polarity (V+ / V-) before powering on.
- Cable labeling makes future maintenance easier.
- Keep proper ventilation and airflow to reduce heat build-up.
Support & BOQ Help
Share your cabinet size and module count, and we can guide PSU quantity and distribution planning.
- Cabinet/module count (how many modules?)
- Indoor/Outdoor + brightness requirement
- DC cable length + distribution method
Featured Power Supply Models
Explore other popular LED display power supply options.
Tk 1,600.00 (per unit, project offer dependent)
- Regulated 5V output for cabinet electronics
- Protection: short circuit / overload / over-voltage
- Auto recovery after fault
- Mounting holes for fixed installation
Tk 1,799.00 (per unit, project offer dependent)
- High-current output for larger cabinet loads
- Wide input voltage planning
- Natural air convection cooling
- Protection for safer cabinet operation
FAQs
Common questions about PSU selection for LED cabinets.
1How many modules can a 5V 20A PSU run?+
It depends on module type, brightness target, and content. For safe planning, do load calculation and keep a power margin.
2What should I do if the PSU overheats?+
Improve airflow, reduce load, check wiring and voltage drop, and ensure proper grounding.