LED modules, a cabinet, power supply, receiving card and cables beside an indoor LED video wall

LED Display Panel Price in Bangladesh

The price of an LED display panel in Bangladesh varies by pixel pitch, module dimensions, LED technology, driver configuration and order quantity. For replacement requirements, compatibility with the existing cabinet, receiving card and power system is equally important. Sasha Corporation supplies LED display solutions and provides component selection, compatibility guidance and quotation support for indoor and outdoor LED modules, replacement panels and related hardware.

LED Display Panel Models & Prices in Bangladesh

LED display panels are available in different pixel pitches, physical dimensions and technical configurations. Buyers should compare the actual module specifications before selecting components for new installations, repairs or system upgrades.

Sasha's existing catalogue includes indoor and outdoor display models with documented module specifications. The following examples can be used to identify hardware requirements.

These dimensions and resolutions are catalogue references for the stated models, not universal specifications for every module with the same pixel pitch.

Compare LED module specifications
LED panel catalogue references and quotation-only component prices
Catalogue ReferencePixel PitchModule DimensionsModule ResolutionPanel Price
P2 Indoor LED Module2.0mm320mm x 160mm x 16.6mm160x80 = 12,800 pixelsQuotation Required
P2.5 Indoor LED Module2.5mm320mm x 160mm x 16.6mm128x64 = 8,192 pixelsQuotation Required
P3 Indoor LED Module3.0mm192mm x 192mm x 14mm64x64 = 4,096 pixelsQuotation Required

Understanding LED Panel Prices

The cost of an individual module depends on the exact model, production revision, quantity, availability and required accessories.

A supplier quotation should clearly identify whether the offered price covers:

  • One individual LED module
  • A complete cabinet containing multiple modules
  • Modules supplied by area or quantity
  • Additional HUB boards, cables or fixing accessories
  • Replacement labour, calibration or installation services

Important: Published per-square-foot prices for complete LED display installations must not be treated as individual module prices.

What Is an LED Display Panel?

An LED display panel is a component used to construct a modular direct-view LED screen. In many product catalogues, the term panel refers to an individual LED module containing the pixels that create a portion of the displayed image.

However, some manufacturers and suppliers also use the term LED panel for a fully assembled cabinet. Buyers should confirm exactly which component is being supplied.

How an LED Display Module Works

An LED module contains an arrangement of LED pixels and electronic components responsible for producing part of the display image.

The module receives electrical power and image-control signals through compatible connections. A receiving card, often through a HUB interface, distributes mapped display data to the modules installed within a cabinet.

Multiple compatible modules form a larger screen surface.

A typical system follows this arrangement:

  1. Content Source
  2. LED Controller
  3. Receiving Card
  4. LED Modules

The display's power-distribution system supplies the required electrical power separately.

Front and rear of a Synoveta LED cabinet assembly
Catalogue cabinet assembly · Front and rear hardware reference

LED Module vs LED Panel vs Complete Screen

Term and Meaning
TermMeaning
LED ModuleIndividual image-producing component
LED PanelMay refer to a module or an assembled cabinet, depending on the supplier
LED CabinetSupporting assembly containing compatible modules and internal hardware
LED Display ScreenComplete system consisting of modules, cabinets, electronics and control equipment

Understanding these differences helps buyers compare quotations correctly and avoid ordering incompatible replacement equipment.

Types of LED Display Panels & Modules

LED modules differ in construction, environmental suitability, pixel density and service requirements.

  • Indoor LED Display Panels

    Indoor modules are designed for controlled interior environments such as offices, conference rooms, studios, showrooms and commercial spaces. They commonly offer pixel pitches suited to relatively close viewing distances. Important selection factors include module dimensions, pixel resolution, brightness, driver configuration and compatibility with the intended cabinet.

  • Outdoor LED Display Panels

    Outdoor modules are developed for external applications, including advertising screens, roadside displays and commercial building signage. Their construction must be evaluated for suitable brightness, environmental protection and integration with an appropriate cabinet. An outdoor module should not automatically be considered waterproof without confirming its actual protection specifications and installed enclosure.

  • SMD LED Display Modules

    Surface-Mounted Device (SMD) technology uses packaged LED components mounted onto a circuit board. SMD modules are widely used in modular indoor and outdoor display systems, with specifications varying by product series.

  • GOB-Protected LED Modules

    Glue on Board (GOB) generally refers to a protective treatment applied over the LED surface. The specific coating can influence resistance to contact and certain environmental exposures, but the protection level depends on the manufacturer's implementation. GOB protection does not automatically make a module suitable for outdoor installation.

  • COB LED Display Assemblies

    Chip on Board (COB) technology integrates LED chips onto a substrate and uses a protective surface structure according to the product design. COB products can offer fine-pitch configurations, but their assembly, servicing and replacement procedures may differ from conventional SMD modules. Buyers should confirm whether replacements are supplied as individual modules, larger assemblies or proprietary cabinet components.

LED Display Panel Selection Checklist

Before ordering a new LED panel or replacement module, collect the technical details needed to confirm compatibility.

Display & Module Specifications

  • Pixel Pitch: Confirm the specified centre-to-centre pixel spacing.

  • Module Dimensions: Record width, height, depth and fixing positions.

  • Module Resolution: Identify the actual horizontal and vertical pixel count.

  • LED Technology: Check whether the product uses SMD, GOB-treated SMD, COB or another construction.

  • Driver IC & Scan Configuration: Confirm the exact driver type and supported scanning arrangement.

System Compatibility & Supply

  • Signal Interface: Check connector type, pinout, orientation and HUB compatibility.

  • Electrical Requirements: Verify module-level DC voltage, current, polarity and power demand.

  • Cabinet Compatibility: Check mounting points, available space, servicing method and mechanical alignment.

  • Colour Consistency: Review production batch, calibration requirements and compatibility with surrounding modules.

  • Quantity & Availability: Confirm the required number of modules and exact replacement revision.

For replacement orders, the existing module label, photographs and working controller configuration are particularly useful.

LED Display Panel Specifications & Buying Guide

Purchasing an LED module requires checking pixel pitch, hardware compatibility, installation requirements and total component cost.

1. Pixel Pitch, Resolution & Pixel Density

Choose pixel pitch and module resolution for the screen dimensions, content and viewing distance. Confirm the manufacturer's actual pixel count and module specifications before ordering.

2. LED Packaging, Driver IC & Refresh Performance

Review LED packaging, driver IC and scan configuration together. Confirm refresh performance with the selected receiving card, especially for displays used in camera recording.

3. Module Size, Cabinet Fit & Mounting

Check module dimensions, fixing points and cabinet openings. Confirm front-service or rear-service access, connector clearance and cable routing for the intended installation.

4. Electrical Requirements & Signal Compatibility

Verify module-level DC voltage, current and polarity. Match the receiving card, HUB board, driver IC, scan mode and signal interface to the exact module revision.

5. LED Panel Procurement Cost & Warranty

Request an itemized quotation identifying the module, revision, quantity and sales unit. Confirm included accessories, compatibility, delivery, warranty coverage and any replacement or calibration services.

How to Estimate the Initial LED Panel Budget

Module Hardware Cost = Required Module Quantity × Quoted Price per Module

Use the selected module's quoted sales unit and required quantity for an initial estimate. Confirm compatible accessories, transportation, replacement labour, configuration, calibration and warranty scope in the final quotation.

LED Display Panel Compatibility & Replacement

Replacing a damaged LED module requires confirming the source of the problem and selecting a compatible component.

A blank or distorted area does not always indicate a defective module. Signal-cable problems, incorrect receiving-card settings or unstable power can produce similar symptoms.

  1. Identify the Existing Module

    Record the module label, model, dimensions, pixel pitch and production details.

    Photograph the front, rear, connector positions and mounting arrangement.

  2. Diagnose the Display Fault

    A qualified technician should check the relevant power, data and module connections before confirming that a replacement is necessary.

    The receiving-card configuration and cabinet mapping should also be reviewed.

  3. Verify Replacement Compatibility

    Confirm the exact electrical, mechanical and signal requirements.

    For replacement components, check the driver IC, scan mode, connector pinout and cabinet arrangement rather than relying only on the pixel pitch.

  4. Replace & Reconfigure

    After safely isolating the equipment, a qualified technician can install the compatible module and restore or verify the relevant display configuration.

    The appropriate procedure depends on the manufacturer's service instructions.

Global LED Display Brands & Technologies

Sasha Corporation is an authorized distributor of Absen and LAMPRO LED displays in Bangladesh. Our wider portfolio brings together display hardware, compatible control systems and power components selected for each project's requirements.

The published COB catalogue features Synoveta CX Series models, while the documented Dorodee Restaurant installation provides a Leyard COB project reference. The wider display portfolio also includes LianTronics and AOTO Electronics technologies.

Control technologies include NovaStar, Huidu and Colorlight, alongside Mean Well and G-Energy for power components. These brands represent different equipment categories; the exact COB model, component compatibility and warranty scope are confirmed in the project BOQ.

Absen logoLAMPRO logoSynoveta logoLeyard logoLianTronics logoAOTO Electronics logoNovaStar logoHuidu logoColorlight logoMean Well logoG-Energy logo

Why Choose Sasha Corporation for LED Display Panels?

Sasha Corporation provides LED display supply, installation and technical integration services in Bangladesh, with documented indoor and outdoor projects and related component catalogues.

For module or panel requirements, the most important consideration is selecting hardware that matches the existing system or the proposed installation.

Indoor LED video wall mounted on a brick wall above a red-carpeted stage
LED Modules
System Integration
Local Support

Component Selection & Guidance

Compare module dimensions, pixel pitch and display configurations to identify suitable components before confirming availability and pricing.

Replacement Compatibility

Share module labels, photographs, dimensions and controller details to help identify compatible replacements.

Hardware & System Integration

Select compatible receiving cards, controllers, power supplies and accessories for the complete signal and power system.

Documented LED Experience

Our portfolio includes the National Library's P2.5 LAMPRO indoor LED installation in Dhaka. View project.

Project-Based Quotation & Support

Confirm component availability, compatibility, warranty and technical services in an itemized quotation.

LED Display Panel FAQs

What is an LED display panel, and how does it differ from an LED module?

An LED display panel is a component or assembled section used to form a larger LED screen. Depending on the manufacturer and product terminology, a panel may refer to an LED module or a more complete cabinet assembly. The exact product dimensions and supplied components should always be confirmed. An LED module contains the pixel components and associated circuitry needed to produce part of an image. The term LED panel is sometimes used for the same component, but it may also describe a larger assembled unit. Check the manufacturer's product definition before ordering.

What types of LED display panels are available?

LED display panels are available for indoor and outdoor applications, with different pixel pitches, dimensions and construction methods. Common technologies include SMD-based modules and COB configurations. Selection depends on the intended environment, required resolution and system compatibility.

How much does an LED display panel cost in Bangladesh?

LED panel prices depend on pixel pitch, dimensions, technology, brand, specifications and order quantity. A replacement module is priced differently from a complete LED cabinet or installed screen. Request a component-specific quotation with the exact model and quantity.

Are LED panels with the same pixel pitch interchangeable?

Not necessarily. Two modules with the same pixel pitch can have different dimensions, pixel resolutions, scan configurations, driver ICs, connectors and power requirements. Compatibility must be checked against the existing cabinet, receiving card and control configuration.

Can I replace a damaged LED display module?

Yes, if a suitable replacement is available and the display supports the required service procedure. A technician should confirm the faulty component, check compatibility and complete any necessary configuration or calibration after replacement.

Can SMD and COB LED panels be serviced in the same way?

Not always. SMD and COB panels have different construction methods and may require different repair or replacement procedures. Certain COB systems use manufacturer-specific servicing methods, so the available service options should be verified for the selected model.

Why does a replacement LED panel look different from the original?

Colour or brightness differences can occur because of production-batch variation, component ageing, LED characteristics or calibration settings. Even a compatible replacement may require adjustment to achieve a closer visual match with surrounding modules.

What details do I need when ordering a replacement LED panel?

Provide the manufacturer, model number, pixel pitch, module dimensions, connector photographs and required quantity. Information about the existing power supply, receiving card and cabinet can also help Sasha assess compatibility and provide quotation guidance.

Chat on WhatsApp support